Metal thermal reduction method to produce titanium sponge-like. Purity% (by mass) is generally 99.1 to 99.7. % Impurity element (mass) amount of 0.3 to 0.9% oxygen impurity element (mass) of 0.06 to 0.20, hardness (HB) of 100 to 157, depending on the purity to MHTi4 WHTiO into five levels.
2014年9月26日星期五
Although titanium sponge material in the Second
Although titanium material in the Second was discovered seven years ago , but due to refining process was not easy ( titanium sponge is very easy to combine with oxygen ) , scientists have been unable to titanium alloy be refined into useful substances metals. Until 1938 , DuPont developed a new way to extract , plus magnesium reduction method, the red and gold reserves in the ground ore , after chlorination, plus magnesium , restore titanium alloy pump it and become a titanium sponge titanium, to a ninety-four three years , DuPont began producing a large number of titanium sponge metal products.Titanium is a metallic chemical element , because the refining process is not easy, and less expensive titanium sponge production , it is only used in the early titanium sponge science , marine science and other high-tech titanium sheet science and energy development . And daily necessities are to begin in applied to the titanium sponge .We can be a magnet placed on the table , then leaned over the frame , if it is not generating the magnetic response of titanium frames . Also check its hinge , titanium glasses are placed two plastic or metal liner in the hinge , in addition , because of different metals with different electrical conductivity , so with conductive index can be measured whether the titanium metal.
订阅:
博文评论 (Atom)
没有评论:
发表评论