Tribological effects of drilling titanium swarf titanium sponge powder

U.S. University cutting issues the appropriate amount of cutting fluid has been studied in an attempt to meet the sunrui Titanium Artificial Joint processing requirements, the minimum amount of the cutting fluid, cutting fluid associated with

Costs are minimized.

They made the test car company, the concentration of the cutting fluid, workpiece material, tool type and geometry parameters are all tested and studied, and the surface roughness, the plot

BUE and cutting forces are analyzed, obtained by testing the most appropriate cutting fluid consumption. American companies "minimal lubrication" processing techniques have been studied, the cutting fluid or aerosol

By acting on the tool machining area, the cutting fluid flow controlled by the CNC program, and achieved good results. Cheng-Yong Wang, who used a variety of minimal lubrication technology for drilling composite panels. In the drill

When cutting aluminum-titanium mulsunrui aircaft investment tilayer composite plate, friction and wear effects drilling titanium chips, will lead to aluminum hole flared, the volatility and average pore diameter aperture value increases and may exceed the difference. Test

Uses the least amount of lubrication technology, the use of coated tools and the use of swarf removal and reaming processing methods to reduce the width of the blade, increasing the feed axis angle and use the ladder to ensure the machining hole

Quality.